Project Step-by-Step

1. Unfold shelf and place on the edge of the planter.

2. Connect tubing to the base of the fountain.

3. Feed tubing through shelf and place fountain on shelf.

4. Place pump in the planter.

5. Connect tubing from fountain to the outlet of the pump with the adapter.

6. Route the power cord up and out the back edge between planter and shelf.

7. Fill the planter with water until 2/3 full, plug in, and enjoy!

* NOTE: Please allow a few minutes for the pump to prime and run normally.

Project Tips

• Every planter fountain is different! For best results, refer to the product packaging or instruction manual for recommendations.

• Once assembled and running, add aquatic plants and small fish as a final touch.