Project Step-by-Step
Connect tubing to the base of the fountain.
Connect tubing from fountain to the outlet of the pump with the adapter.
Place the pump in the planter.
Clip the fountain to the lip of the planter.
For more discrete cord appearance, lock in place by pinching the cord inside the clamp. Run the cord up and over the back edge of the planter.
Fill the planter with water until 2/3 full, plug in, and enjoy!
* NOTE: Please allow a few minutes for the pump to prime and run normally.
Project Tips
Every planter fountain is different! For best results, refer to the product packaging or instruction manual for recommendations.
Once assembled and running, add aquatic plants and small fish as a final touch.